STRI is in general accredited for performing tests in accordance with IEC 60060-1 for product standards according to the table below and for the following voltage types and levels:
- AC 2 kV up to 1050 kV
- DC 10 kV up to 1200 kV
- LI 50 kV up to 2600 kV
- SI 100 kV up to 1750 kV
- PD 1 pC up to 2 nC
- Cap 0.016 pF up to 80 µF
- Tan d 5×10-5 up to 0.01 rad (0,005 up to 1 %)
- RIV 5 up to 5000 µV
- AC current 200 up to 10 000 A
- DC current 200 up to 10 000 A
- Resistance 2 up to 2000 µohm
- Temperature -40 °C up to +350 °C
STRI has flexible scope for testing, which means that we are authorised to upgrade, for example, add and modify the scope of accreditation, without prior notice to Swedac.
We have strict routines for the introduction of new standards/methods. As a routine we remove a standard/method that has not been used over a period of two years.
If the standard/method that you are looking for is not included in our scope, please contact us.
Swedac retrospectively examines and evaluates the methodological changes made within the framework of flexibility. This means that the scope presented on the Swedac website does not always correspond with the scope that we present.
Information about flexible scope, please visit the Swedac website
Scope of accreditation
| Standard | Edition | Title | Paragraph |
|---|---|---|---|
| ANSI/SAIA A92.2-2021 | 2021 | American National Standard for VEHICLE-MOUNTED ELEVATING and ROTATING AERIAL DEVICES | 5.4.2.1-7 |
| Cigré TB 496 | 2012-04 | Recommendations for Testing DC Extruded Cable Systems for Power Transmission at a Rated Voltage up to 500 kV | Whole, except 5.2.2 |
| CISPR 16-1-1 | Ed. 5.0, 2019-05 | Specification for radio disturbance and immunity measuring apparatus and methods – Part 1-1: Radio disturbance and immunity measuring apparatus – Measuring apparatus | Quasi-peak detector, band B |
| CISPR TR 18-2 | Ed. 3.0, 2017-10 | Radio interference characteristics of over-head power lines and high-voltage equipment. Part 2: Methods of measurement and procedure for determining limits | Quasi-peak detector, band B |
| ELECTRA No. 189 | 2000-04 | Recommendations for tests of power transmission dc cables for a rated voltage up to 800 kV (ELECTRA 72, 1980 – Revision) | Whole |
| GHOST R 52565-2006 | 2006 | AC circuit-breakers for voltages from 3 to 750 kV – General specifications | 9.9 |
| IEC 60044-8 | Ed. 1.0, 2002-07 | Instrument transformers. Part 8: Electronic current transformers | 8.2, 8.3.1.1-3, 8.3.2-3 8.5, 9.2.2 |
| IEC 60060-1 | Ed. 3, 2010-09 | High-voltage test techniques Part 1: General definitions and test requirements | Whole, except par 9 |
| IEC 60060-2 | Ed. 3, 2010-11 | High-voltage test techniques Part 2: Measuring Systems | Whole |
| IEC 60068-2-1 | Ed. 6.0, 2007-03 | Environmental testing – Part 2-1: Tests – Test A: Cold | 4.5 |
| IEC 60068-2-2 | Ed. 5.0, 2007-07 | Environmental testing – Part 2-2: Tests – Test B: Dry heat | 4.5 |
| IEC 60068-2-78 | Ed. 2.0, 2012-10 | Environmental testing – Part 2-78: Tests – Test Cab: Damp heat, steady state | 4.1 |
| IEC 60137 | Ed. 7.0, 2017-03 Corr. 1, 2018-05 | Insulated bushings for alternating voltages above 1 000 V | 7.1-7.3, 8.1-8.8 (8.6 with restrictions), 9.1-9.6 |
| IEC 60214-1 | Ed. 2.0, 2014-05 | TAP-changers – Part 1: Performance requirements and test methods | 5.2.8.2-9, 7.2.5.2-9 |
| IEC 60230 | Ed. 2.0, 2018-01 Amd. 1, 2021-12 | Impulse tests on cables and their accessories | Whole |
| IEC 60270 | Ed. 3.0, 2000-12 Corr. 1, 2001-10 Amd. 1, 2015-11 | High voltage test techniques – Partial discharge measurements | Whole, except 4.5.2 - 4.5.5 |
| IEC 60358-1 | Ed. 1.0, 2012-06 Corr. 1, 2013-06 | Coupling capacitors and capacitor dividers | 9.2.2-9.2.5, 10.1-10.4 |
| IEC 60502-2 | Ed. 3.0, 2014-02 | Power cables with extruded insulation and their accessories for rated voltages from 1 kV ( U m = 1,2 kV) up to 30 kV ( U m = 36 kV) – Part 2: Cables for rated voltages from 6 kV ( U m = 7,2 kV) up to 30 kV ( U m = 36 kV) | 16.2-16.4, 17.4, 17.6.2, 17.7-17.10, 18.2.4-18.2.10, 18.3.2-18.3.5, 19.4-19.4, 19.13, 19.15, 19.20, 19.21, 19.23, 19.24, Annex D-G |
| IEC 60507 | Ed. 3, 2013-12 Corr. 1, 2018-08 | Artificial pollution tests on high-voltage ceramic and glass insulators to be used on a.c. systems | Only voltage measurement |
| IEC 60811-401 | Ed. 1.0, 2012-03 Amd. 1, 2017-07 | Electric and optical fibre cables – Test methods for non-metallic materials – Part 401: Miscellaneous tests – Thermal ageing methods – Ageing in an air oven | 4.2.1-4.2.5, 4.2.7, Annex A, Annex B.1, Annex B.2.1, Annex B.2.3, Annex C.1, Annex C.2 |
| IEC 60840 | Ed. 5.0, 2020-05 | Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um = 36 kV) up to 150 kV (Um = 170 kV) – Test methods and requirements | 9.2, 9.3, 10.5, 10.9, 10.10, 10.12, 12.4.3-7, 12.4.9, 12.5.3-7, 12.5.11, 12.5.16, 12.5.19, 12.5.20, 13.2.4, 13.2.5, 13.3.2.4, Annex D, Annex G |
| IEC 60885-3 | Ed. 2.0, 2015-04 | Electrical test methods for electric cables. Part 3: Test methods for partial discharge measurements on lengths of extruded power cable | Short cables (≤50 meter) |
| IEC 61057 | Ed. 2.0, 2017-06 | Live working – Insulating aerial devices for mounting on chassis | Annex E |
| IEC TS 61245 | Ed. 2.0, 2015-03 Corr. 1, 2018-08 | Artificial pollution tests on high-voltage insulators to be used on d.c. systems | Whole |
| IEC 61284 | Ed. 2, 1997-09 Corr. 1998-09 | Overhead lines – Requirements and tests for fittings | 14 (14.5 only RIV) |
| IEC 61869-1 | Ed. 2.0, 2023-06 | Instrument transformers – Part 1: General requirements | 7.2.2-4, 7.2.5.1, 7.2.12, 7.3.1-4, 7.3.7, 7.3.10, 7.4.1-2, 7.4.8 |
| IEC 61869-2 | Ed. 1.0, 2012-09 | Instrument transformers – Part 2: Additional requirements for current transformers | 7.2.2-7.2.3, 7.3.1, 7.4.3 |
| IEC 61869-5 | Ed. 1, 2011-07 Corr. 1, 2015-08 | Instrument transformers – Part 5: Additional requirements for capacitor voltage transformers | 7.2.2-7.2.4, 7.2.501, 7.2.503, 7.2.504, 7.3.1, 7.3.1.501-7.3.1.504, 7.3.2, 7.3.501, 7.4.1, 7.4.3, 7.4.501 |
| IEC 61869-14 | Ed. 1.0, 2018-07 | Instrument transformers - Part 14: Additional requirements for current transformers for DC applications | 7.2.2, 7.2.3.2, 7.2.3.3, 7.2.4, 7.2.5.1, 7.2.1401, 7.3.1, 7.3.2, 7.3.4, 7.3.1401, 7.4.1, 7.4.3, 7.4.1401.1, 7.4.1401.2 |
| IEC 61952 | Ed. 2, 2008-05 | Insulators for overhead lines – Composite line post insulators for A.C. systems with a nominal voltage greater than 1 000 V – Definitions, test methods and ac-ceptance criteria | 10.2.3, 11.1 |
| IEC 61954 | Ed. 3.0, 2021-10 | Static var compensators (SVC) – Testing of thyristor valves | 5.1-5.3, 6.1-6.3, 7.2.2 |
| IEC 62067 | Ed. 3.0, 2022-04 | Power cables with extruded insulation and their accessories for rated voltages above 150 kV (Um = 170 kV) up to 500 kV (Um = 550 kV) – Test methods and requirements | 9.2, 9.3, 10.5, 10.9, 10.10, 10.12, 12.4.3-12.4.6, 12.4.7.1, 12.4.7.2, 12.4.9, 12.5.3-12.5.7, 12.5.11, 12.5.16, 13.2.4, 13.2.5, 13.3.2.4, Annex D, Annex G |
| IEC 62271-1 | Ed. 2.0, 2017-07 Amd. 1, 2021-10 | High-voltage switchgear and controlgear – Part 1: Common specifications for alternating current switchgear and controlgear | 7.2.2-7.2.4, 7.2.6, 7.2.7.2, 7.2.7.3, 7.2.8.2-7.2.8.4, 7.2.9, 7.2.10, 7.2.12, 7.3, 7.4.4.1-7.4.4.3, 7.5, 7.9.1.1, 8.2, 8.4, 8.6, Annex E |
| IEC 62271-100 | Ed. 3.0, 2021-07 | High-voltage switchgear and controlgear – Part 100: Alternating-current circuit-breakers | 7.2.2, 7.2.3, 7.2.4, 7.2.6, 7.2.7.2, 7.2.7.3, 7.2.8.2 - 7.2.8.4, 7.2.9, 7.2.10, 7.2.12, 7.3, 7.4.4, 7.5, 7.9 (Not 7.9.3.2), 7.101.3, 8.2, 8.2.101, 8.6 (not paint and corrosion), 9.102.2, Annex B, Annex C |
| IEC 62271-108 | Ed. 2.0, 2020-07 | High-voltage switchgear and controlgear – Part 108: High-voltage alternating cur-rent disconnecting circuit-breakers for rated voltages of 72,5 kV and above | 7.2–7.5, 7.9, 7.101–7.113, 8. With restrictions. |
| IEC 62271-109 | Ed. 3.0, 2019-04 | High-voltage switchgear and controlgear – Part 109: Alternating-current series ca-pacitor by-pass switches | 7.2.2-6, 7.2.7.2-3, 7.2.8.2-4, 7.2.9-11, 7.2.12, 7.3, 7.4.4.101-102, 7.5, 7.9.1.1, 8.2, 8.2.101, 8.4, 8.6, Annex A |
| IEC 62271-203 | Ed. 3.0, 2022-05 | High-voltage switchgear and controlgear – Part 203: AC gas-insulated metal-enclosed switchgear for rated voltages above 52 kV | 7.2.2-7.2.10, 7.2.12, 7.4.4, 7.5, 7.9, 8.2, 8.4, 8.6, Annex A |
| IEC 62501 | Ed. 2.0, 2024-04 | Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission – Electrical testing | 4.1.5, 7.3.2-5, 8.4.1-4, 9, 9.3.2-3, 9.4.1, 9.4.2, 9.4.2.2-3, 9.4.3, 9.4.3.2-3 |
| IEC/TR 62730 | Ed. 1.0, 2012-03 | HV polymeric insulators for indoor and outdoor use tracking and erosion testing by wheel test and 5000 h test | 7.2 |
| IEC 62895 | Ed. 1.0, 2017-05 | High Voltage Direct Current (HVDC) power transmission – Cables with extruded insulation and their accessories for rated voltages up to 320 kV for land applications – Test methods and requirements | Whole, except 9.3, 10 c), h) 12.5 a), e), g), h), i), k), m) |
| DIN IEC 62895 (VDE 0276-2895) | February 2019 | Kabel zur Hochspannungs-Gleichstrom-Übertragung (HGÜ) –Kabel mit ex-trudierter Isolirung und ihre Garnituren fÜr Nennspannungen bis 320 kV für Anwendungen an Land –Prüfverfaren und Anforderungen (IEC 62895:2017) | Tabelle NC.1: 8.2, 9.2, 12.4.5-8 |
| IEC 62927 | Ed. 1.0, 2017-07 Amd. 1, 2023-05 | Voltage source converter (VSC) valves for static synchronous compensator (STATCOM) – Electrical testing | 4.1.9, 7.3.1-3, 8.4.1-3, 9.3, 9.4.1.2-3, 9.4.2 |
| IEC/IEEE 65700-19-03 | Ed. 1, 2014-07 | Bushings for DC applications | 8.1-8.5, 9.1-9.7, 10.1-10.3 |
| IEEE std. 4 | 2013 | IEEE Standard Test Techniques for High-Voltage Testing | Whole |
| IEEE Std. C37.04 | 2018 | IEEE Standard for Rating and Requirements for AC High-Voltage Circuit Breakers with Rated Maximum Voltage Above 1000 V | 5.3-5 |
| IEEE Std. C37.09 | 2018 | IEEE Standard Test Procedure for AC High-Voltage Circuit Breakers with Rated maximum Voltage Above 1000 V | 4.4, 4.5.2, 4.5.4 - 4.5.8 |
| IEEE C57.13 | 2016 | IEEE Standard Requirements for Instrument Transformers | 11.2, 12.2 |
| IEEE C57.19.00 | 2023 Errata 2023-08-31 | IEEE Standard for General Requirements and Test Procedure for Power Apparatus Bushings | 7.1, 7.2.1.1-3,7 .2.1.4.1-2, 7.2.1.5, 7.2.3-4, 7.3.1, 7.4.1-4 |
| IEEE C57.131 | 2012 | IEEE Standard Requirements for Tap Changers | 5.2.6.3-9, 7.2.5.3-9 |
| IEEE C62.11 | 2020 | IEEE Standard for Metal-Oxide Surge Arresters for AC Power Circuits (>1 kV) | 8.1, 8.7 |
